Plastic mold processing molds are mainly composed of pouring system, temperature adjustment system, molding parts and structural parts.

The service life of the mold cleaning thimble is one year. If it exceeds a one-year cycle, the thimble will become dirty on the surface due to gas accumulation and mold impurities.

Plastic mold processing refers to the processing of plastic molding and plastic blanking tools. It consists of an upper mold and a lower mold.

The so-called parting surface is the surface where the mold is opened to take out the product. The selection of parting surface is also the first step of mold design.

The first thing to do is to carry out on-site inspections, verifications, and evaluations of the verification management system for the outsourcing production and processing enterprises, and make a work summary.

Hot runner mold: The structure of this type of mold is roughly the same as that of the nozzle.

The first thing to look at is the mold material. Many customers know that the mold material must be determined with the manufacturer before placing the mold order.

The polishing of plastic molds needs to be done step by step, step by step, first need to use coarse to fine oilstone

First, the effective management of product data management, process data management, drawing document management

Injection molding mold-TV shell, keyboard buttons, electronic products, computer peripheral plastic products, toys, housewares (most commonly used)