The Main Treatment Method To Avoid Plastic Mold Compression Mold

The primary purpose of plastic molds: compression molding, extrusion molding, injection molding, blow molding. Plastic mold knot: concave mold combination substrate. Plastic mold features: can process different shapes of plastic parts. Plastic molds are used for compression molding, extrusion molding, injection molding, and blow molding. Abbreviation for combined mold with low foam molding. The harmonious change of mold convex, concave mold and auxiliary molding system can process a series of plastic parts of different shapes and different sizes.

Plastic molds are the mother of industry, and new product releases now involve plastics. It mainly includes a female mold with a variable cavity composed of a female mold combined substrate, a female mold component, and a female mold combined card board. The convex mold combined substrate, a convex mold component, a male mold combined card board, a cavity cutting component and A punch with a variable core composed of side-cut composite plates.

In order to improve the function of plastics, various auxiliary materials, such as fillers, plasticizers, lubricants, stabilizers, colorants, etc., must be added to the polymer to become a plastic with outstanding functions. The device is quasi-mould maintainer, avoiding plastic mold compression: The mold maintainer, also known as the mold monitor, and the electronic eye, is primarily a mold maintenance system that monitors, controls, and detects the operating conditions of various injection molding machines in real time. It can effectively maintain valuable molds, can effectively detect whether the product is qualified, and check whether there are residues before closing the mold to avoid mold damage.

Operation principle: When the injection molding machine opens the mold in place, the output signal triggers the mold maintainer, the latter takes images of the mold cavity one after another, and monitors whether the ejector pin pushes the molded workpiece out and falls. When it is monitored that the workpiece has fallen completely, the mold supervisor announces the acknowledgement signal is fed back to the injection molding machine to start the next cycle. If the workpiece does not fall within the set time or there is debris between the molds, the mold maintainer will announce an abnormal signal, stop the injection molding machine and give an alarm.